logo

sd|sd
Non-vehicle DC charger (60KW)
JJDL-Z001
0.0 0.0
The main technical parameters
AC input voltage  380V ± 15%
Grid frequency 50Hz ± 10%
Output current level 0A~240A
Applicable battery capacity 60AH~3000AH
Rated output voltage 750V/500V
Output voltage range 750V-250V / 500V-250V
Voltage accuracy ≤ ± 0.5%
Current accuracy ≥30A: not more than ± 1%; <30A: not more than ± 0.3A
Voltage accuracy ≤ ± 0.5%
Steady flow accuracy ≤ ± 1%
Ripple coefficient Valid value: not more than ± 0.5%; peak value: not more than ± 1%
Current unbalance ≤5%
Standby power consumption ≤0.1% output rated power
Total harmonic current of active charger ≤5% Passive charger harmonic current ≤30%
effectiveness ≥93%
Full load power factor ≥0.92 (passive charger) or 0.99 (active power factor correction charger)
Load level Continuous operation at rated output current of class Ⅰ (100%)
Automatic current limiting feature When the output current exceeds the output current limit setting value, the constant current output, the output current will not increase
Output short circuit protection When the output is short-circuited, the module protects itself to prevent damage, and the fault can be automatically restored to work
Output overvoltage protection When the output voltage exceeds Voutmax5% ± 5VDC, the output will be automatically stopped to prevent damage to the equipment
Start delay 3S-8S
Insulation resistance ≥10M
Dielectric strength Output to ground, input to ground, input to output 2.5KVAC, no flashover or flashover in 1min.
Oscillation immunity Level 3 (1MHz and 100kHz)
Electrostatic discharge immunity Level 3
Radio frequency electromagnetic field radiation immunity Level 3
Electrical fast transient burst immunity Level 3
Surge (shock) immunity Level 3
Immunity to conducted disturbances induced by radio frequency fields Level 3
Power frequency magnetic field immunity level 4
Damped oscillation magnetic field immunity level 4
Harmonic current limit requirement (THD) ≤8% (Class A equipment)
noise ≤55 dB

The main technical parameters
AC input voltage  380V ± 15%
Grid frequency 50Hz ± 10%
Output current level 0A~240A
Applicable battery capacity 60AH~3000AH
Rated output voltage 750V/500V
Output voltage range 750V-250V / 500V-250V
Voltage accuracy ≤ ± 0.5%
Current accuracy ≥30A: not more than ± 1%; <30A: not more than ± 0.3A
Voltage accuracy ≤ ± 0.5%
Steady flow accuracy ≤ ± 1%
Ripple coefficient Valid value: not more than ± 0.5%; peak value: not more than ± 1%
Current unbalance ≤5%
Standby power consumption ≤0.1% output rated power
Total harmonic current of active charger ≤5% Passive charger harmonic current ≤30%
effectiveness ≥93%
Full load power factor ≥0.92 (passive charger) or 0.99 (active power factor correction charger)
Load level Continuous operation at rated output current of class Ⅰ (100%)
Automatic current limiting feature When the output current exceeds the output current limit setting value, the constant current output, the output current will not increase
Output short circuit protection When the output is short-circuited, the module protects itself to prevent damage, and the fault can be automatically restored to work
Output overvoltage protection When the output voltage exceeds Voutmax5% ± 5VDC, the output will be automatically stopped to prevent damage to the equipment
Start delay 3S-8S
Insulation resistance ≥10M
Dielectric strength Output to ground, input to ground, input to output 2.5KVAC, no flashover or flashover in 1min.
Oscillation immunity Level 3 (1MHz and 100kHz)
Electrostatic discharge immunity Level 3
Radio frequency electromagnetic field radiation immunity Level 3
Electrical fast transient burst immunity Level 3
Surge (shock) immunity Level 3
Immunity to conducted disturbances induced by radio frequency fields Level 3
Power frequency magnetic field immunity level 4
Damped oscillation magnetic field immunity level 4
Harmonic current limit requirement (THD) ≤8% (Class A equipment)
noise ≤55 dB

Product description
Parameters
概要
The main technical parameters
AC input voltage  380V ± 15%
Grid frequency 50Hz ± 10%
Output current level 0A~240A
Applicable battery capacity 60AH~3000AH
Rated output voltage 750V/500V
Output voltage range 750V-250V / 500V-250V
Voltage accuracy ≤ ± 0.5%
Current accuracy ≥30A: not more than ± 1%; <30A: not more than ± 0.3A
Voltage accuracy ≤ ± 0.5%
Steady flow accuracy ≤ ± 1%
Ripple coefficient Valid value: not more than ± 0.5%; peak value: not more than ± 1%
Current unbalance ≤5%
Standby power consumption ≤0.1% output rated power
Total harmonic current of active charger ≤5% Passive charger harmonic current ≤30%
effectiveness ≥93%
Full load power factor ≥0.92 (passive charger) or 0.99 (active power factor correction charger)
Load level Continuous operation at rated output current of class Ⅰ (100%)
Automatic current limiting feature When the output current exceeds the output current limit setting value, the constant current output, the output current will not increase
Output short circuit protection When the output is short-circuited, the module protects itself to prevent damage, and the fault can be automatically restored to work
Output overvoltage protection When the output voltage exceeds Voutmax5% ± 5VDC, the output will be automatically stopped to prevent damage to the equipment
Start delay 3S-8S
Insulation resistance ≥10M
Dielectric strength Output to ground, input to ground, input to output 2.5KVAC, no flashover or flashover in 1min.
Oscillation immunity Level 3 (1MHz and 100kHz)
Electrostatic discharge immunity Level 3
Radio frequency electromagnetic field radiation immunity Level 3
Electrical fast transient burst immunity Level 3
Surge (shock) immunity Level 3
Immunity to conducted disturbances induced by radio frequency fields Level 3
Power frequency magnetic field immunity level 4
Damped oscillation magnetic field immunity level 4
Harmonic current limit requirement (THD) ≤8% (Class A equipment)
noise ≤55 dB

 

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table

National free consultation phone:

0755-26753428

Address: Comprehensive Building, Gaofa Science and Technology Park, Xili Longjing, Nanshan District, Shenzhen

Copyright© Shenzhen Jiangji Industrial Co., Ltd. 粤ICP备05044478号Powered by www.300.cn

江机实业