logo

sd|sd
Car charger
JJ0C
0.0 0.0

Product introduction:

This product is suitable for lithium batteries such as lithium iron phosphate and lithium manganate. The whole machine has the characteristics of light weight, small size, stable charging, high efficiency, safety and reliability. Can automatically switch between floating charge and equalization. Widely used in electric cars, electric taxis, electric forklifts, electric golf carts, electric police cars, electric cleaning equipment, etc. The input voltage range is 85-265Vac, the output voltage is 200-420Vdc, and the system integrates heat dissipation.

Main features:

CPU control battery management, CAN communication interface, can communicate with BMS with CAN bus in real time, scalable, with C and functions, support N + M parallel, wide range output, suitable for various batteries;

Built-in PFC cable, PF≥0.98, can reduce harmonic pollution to the power grid, LED working instructions and three-color charging status indication, temperature compensation circuit, repair battery, short circuit, overload, overvoltage, undervoltage, leakage, anti Lightning and other protection functions;

Overheat protection: When the internal temperature exceeds 70 ℃, the charging current automatically decreases, and when it exceeds 85 ℃, the charger is shut down protectively. When it drops steadily, charging will resume automatically;

Short-circuit protection: when the output of the charger is short-circuited, the charger automatically shuts down the output. After the fault is eliminated, the charger is restarted with a delay of 10 seconds;

Reverse connection protection: when the battery is reversely connected, the charging machine will cut off the connection between the internal circuit and the battery, and will not start charging to cause damage to the device and equipment;

Input under / over voltage protection: When the input AC voltage is <85V or higher than 265V, the charger will be shut down protectively, and work will resume automatically after the voltage is normal.

 

project

Function parameter

Rated output power

3.3kW

6.6 kW

6.6 kW

Input voltage range

220V ± 15 %

(Single-phase three-wire system)

220V ± 15 %

(Single-phase three-wire system)

220V ± 15 %

(Single-phase three-wire system)

Output voltage range

250420Vdc

250420Vdc

455665Vdc

Output rated current

7.5A

10A

10A

effectiveness

≥93%

Power factor

≥0.99

Ripple accuracy

≤ ± 1 %

Voltage accuracy

≤ ± 1 %

Insulation resistance

≥20MΩ

Working temperature

-40 ~ 60 ℃

Working environment humidity

5% ~ 95 %

Working altitude range

<3000M

cooling method

Forced circulation air cooling

noise

≤50dB

Communication Interface

CAN

Protection level

Indoor IP66

Protective function

     With input under / over voltage protection, over temperature protection, output under / over voltage protection, short circuit protection, reverse output protection and other functions

Standard sizes

345mmx180mmm120mm

(Length x width x height)

475mmx286mmm125mm

(Length x width x height)

 

Product introduction:

This product is suitable for lithium batteries such as lithium iron phosphate and lithium manganate. The whole machine has the characteristics of light weight, small size, stable charging, high efficiency, safety and reliability. Can automatically switch between floating charge and equalization. Widely used in electric cars, electric taxis, electric forklifts, electric golf carts, electric police cars, electric cleaning equipment, etc. The input voltage range is 85-265Vac, the output voltage is 200-420Vdc, and the system integrates heat dissipation.

Main features:

CPU control battery management, CAN communication interface, can communicate with BMS with CAN bus in real time, scalable, with C and functions, support N + M parallel, wide range output, suitable for various batteries;

Built-in PFC cable, PF≥0.98, can reduce harmonic pollution to the power grid, LED working instructions and three-color charging status indication, temperature compensation circuit, repair battery, short circuit, overload, overvoltage, undervoltage, leakage, anti Lightning and other protection functions;

Overheat protection: When the internal temperature exceeds 70 ℃, the charging current automatically decreases, and when it exceeds 85 ℃, the charger is shut down protectively. When it drops steadily, charging will resume automatically;

Short-circuit protection: when the output of the charger is short-circuited, the charger automatically shuts down the output. After the fault is eliminated, the charger is restarted with a delay of 10 seconds;

Reverse connection protection: when the battery is reversely connected, the charging machine will cut off the connection between the internal circuit and the battery, and will not start charging to cause damage to the device and equipment;

Input under / over voltage protection: When the input AC voltage is <85V or higher than 265V, the charger will be shut down protectively, and work will resume automatically after the voltage is normal.

 

project

Function parameter

Rated output power

3.3kW

6.6 kW

6.6 kW

Input voltage range

220V ± 15 %

(Single-phase three-wire system)

220V ± 15 %

(Single-phase three-wire system)

220V ± 15 %

(Single-phase three-wire system)

Output voltage range

250420Vdc

250420Vdc

455665Vdc

Output rated current

7.5A

10A

10A

effectiveness

≥93%

Power factor

≥0.99

Ripple accuracy

≤ ± 1 %

Voltage accuracy

≤ ± 1 %

Insulation resistance

≥20MΩ

Working temperature

-40 ~ 60 ℃

Working environment humidity

5% ~ 95 %

Working altitude range

<3000M

cooling method

Forced circulation air cooling

noise

≤50dB

Communication Interface

CAN

Protection level

Indoor IP66

Protective function

     With input under / over voltage protection, over temperature protection, output under / over voltage protection, short circuit protection, reverse output protection and other functions

Standard sizes

345mmx180mmm120mm

(Length x width x height)

475mmx286mmm125mm

(Length x width x height)

 

Product description
Parameters
概要

Product introduction:

This product is suitable for lithium batteries such as lithium iron phosphate and lithium manganate. The whole machine has the characteristics of light weight, small size, stable charging, high efficiency, safety and reliability. Can automatically switch between floating charge and equalization. Widely used in electric cars, electric taxis, electric forklifts, electric golf carts, electric police cars, electric cleaning equipment, etc. The input voltage range is 85-265Vac, the output voltage is 200-420Vdc, and the system integrates heat dissipation.

Main features:

CPU control battery management, CAN communication interface, can communicate with BMS with CAN bus in real time, scalable, with C and functions, support N + M parallel, wide range output, suitable for various batteries;

Built-in PFC cable, PF≥0.98, can reduce harmonic pollution to the power grid, LED working instructions and three-color charging status indication, temperature compensation circuit, repair battery, short circuit, overload, overvoltage, undervoltage, leakage, anti Lightning and other protection functions;

Overheat protection: When the internal temperature exceeds 70 ℃, the charging current automatically decreases, and when it exceeds 85 ℃, the charger is shut down protectively. When it drops steadily, charging will resume automatically;

Short-circuit protection: when the output of the charger is short-circuited, the charger automatically shuts down the output. After the fault is eliminated, the charger is restarted with a delay of 10 seconds;

Reverse connection protection: when the battery is reversely connected, the charging machine will cut off the connection between the internal circuit and the battery, and will not start charging to cause damage to the device and equipment;

Input under / over voltage protection: When the input AC voltage is <85V or higher than 265V, the charger will be shut down protectively, and work will resume automatically after the voltage is normal.

 

project

Function parameter

Rated output power

3.3kW

6.6 kW

6.6 kW

Input voltage range

220V ± 15 %

(Single-phase three-wire system)

220V ± 15 %

(Single-phase three-wire system)

220V ± 15 %

(Single-phase three-wire system)

Output voltage range

250420Vdc

250420Vdc

455665Vdc

Output rated current

7.5A

10A

10A

effectiveness

≥93%

Power factor

≥0.99

Ripple accuracy

≤ ± 1 %

Voltage accuracy

≤ ± 1 %

Insulation resistance

≥20MΩ

Working temperature

-40 ~ 60 ℃

Working environment humidity

5% ~ 95 %

Working altitude range

<3000M

cooling method

Forced circulation air cooling

noise

≤50dB

Communication Interface

CAN

Protection level

Indoor IP66

Protective function

     With input under / over voltage protection, over temperature protection, output under / over voltage protection, short circuit protection, reverse output protection and other functions

Standard sizes

345mmx180mmm120mm

(Length x width x height)

475mmx286mmm125mm

(Length x width x height)

 

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table

National free consultation phone:

0755-26753428

Address: Comprehensive Building, Gaofa Science and Technology Park, Xili Longjing, Nanshan District, Shenzhen

Copyright© Shenzhen Jiangji Industrial Co., Ltd. 粤ICP备05044478号Powered by www.300.cn

江机实业